HOT STAMPING (hot forged parts)
Technolit Int. offers hot forged parts, as well as stamping and closed die forging at its production facilities.
When dies are used in the stamping process, they limit the metal under processing from each side with the die cavity walls, which results in shaping the blank into a corresponding cavity, so the blank acquires the desired forms and dimensions.
Closed die forging is used for the low volume production. During the closed die forging allowances do not normally exceed 2.5-3 mm (0,0984-0,11811 in); this brings about a considerable metal saving if compared to open die forging and is less labor consuming in subsequent metalworking. A blank is preformed by the open die forging method to simplify the construction and reduce the price of forgings, with the forgings taking the final configuration after the closed die forging.
Stamping on presses with 1800 kg (39.6828 lbs) capacity:
Stamping on presses with 2500 kg (5511.5 lbs) capacity:
Closed die forged hardware (with threaded connections):
Top of page
- HOT STAMPING
- ARTISTIC FORGING
- HEAT TREATMENT